Full-Body Metallic Porcelain Slab 1000x3000 Golden Age Series

Golden Age Metallic Porcelain Panel for Luxury Interiors

Foshan YUPURONG makes the Golden Age Series: fullbody metallic porcelain slab in 1000×3000mm, also ordered as 3000×1000mm. Buyers specify it for luxury villas, heritage libraries, five-star hotels and fine-dining rooms — interiors expected to hold up for decades rather than one fit-out cycle.

This metallic glaze ceramic slab features a matte finish with minimal light reflection under indoor lighting, making it gentle on the eyes. And the full-body figure almost runs through the thickness and survives cutting and edge profiling: it shows the close color as the face. The look sits close to Italian and Spanish sintered stone. The project cost does not.

The panel is thin and light, which keeps dead load down — the deciding factor on retrofit and heritage work, where the original structure was never rated for a 20mm stone bed. Walls, floors, vanity and countertop surfaces, and ventilated facade cladding all take the same slab. We cut sizes and finishes to your drawings, including curved walls, columns, returns and decorative accents. The surface resists scratching, staining and abrasion, and holds its finish under commercial traffic.

Manufacturing runs through our Taiwan-funded factory, with process control and batch consistency documented for spec approval.

Export support is handled in-house:

• Custom crating built around your slab format, to cut transit breakage

• Technical consultation on fixing methods, substrate preparation and cut plans

• Low MOQ, LCL trial orders, free sample kits for design review and client presentations

Send us your cut list or project schedule and we will quote the sizes you need. The current lookbook and a custom-sized sample both ship free.

FAQ 

1. What is the Golden Age Series? 

A fullbody metallic large format thin porcelain slab made by Foshan YUPURONG, in 1000×3000mm and 3000×1000mm. It is used on feature walls, floors, vanity tops, countertops and exterior facade cladding.

2. Is a 1000×3000mm porcelain slab suitable for exterior facades? 

Yes. The same slab is supplied for ventilated facade and rainscreen cladding. Ask us for the fixing method and project documentation before specifying.

3. Can the slab be cut to custom sizes? 

Yes. We produce to your cut list, including curved walls, columns, returns and accent pieces.

4. What is the minimum order quantity? 

We work at low MOQ and accept LCL trial orders. Free sample kits are available for design review.

5. How is the slab packed for export? 

Custom crating is built around your slab format to reduce transit breakage. Packaging is specified per project.

6. Does it compare to Italian or Spanish porcelain? 

Same category of finish and format, at a lower project cost. You can judge it yourself on a free sample.

7. What does "full-body" mean for metallic porcelain?

To be honest, "full-body" here only mean dark colored body, the body color very close to the surface. After cutting, edging and mitring, the exposed edge shows the similar tone, almost full-body — essential for countertops, columns and edge-visible installations.

8. Can Golden Age slabs be used for kitchen countertops?

Yes. The full-body metallic surface is scratch-, stain- and heat-resistant. Suitable for kitchen islands, vanities and reception desks.